John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum
March 28, 2024, 07:33:37 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to the John's Arcade Forum. Glad you made it! Smiley
 
   Home   Help Search Calendar Login Register  
Pages: 1 [2] 3
  Print  
Author Topic: .  (Read 7031 times)
0 Members and 1 Guest are viewing this topic.
STEVESPEEZE
Guest
« Reply #15 on: March 16, 2014, 02:53:13 am »

Aw man......It's gonna be one of THOSE projects......


If was any other cabinet it would be...
but with this mkII cab restore I don't mind spending the money ..
it was one of my favs so its worth it.
I should have a spanky nice pcb by Monday and my side art and t molding are on the way .
the only other thing I haven't ordered was a marquee cuz I wanna be sure im getting a mint one.
Logged
STEVESPEEZE
Guest
« Reply #16 on: March 16, 2014, 07:04:04 pm »

ok so I stripped down the CP today.. any way I look at it im gonna have to have new CP art printed or buy one.
the sides are ok now... looking into MIDWAY sides and mk2 front logos .

http://youtu.be/aBJlQ5LAy0E

 my new board should be here tomorrow.....
 I found decent priced red T Molding....
 Still waiting on sideart....
 Gotta recap the monitor still.
Logged
STEVESPEEZE
Guest
« Reply #17 on: March 17, 2014, 08:35:16 pm »

So fuck the old board.. it needs to get repaired.

Heres the new board... Im finishing this fucking machine
before car show season starts up , I don't care what it cost.

http://youtu.be/fA27UAQRG70

"You can't bring me down"
 suicidal tendencies...
Logged
STEVESPEEZE
Guest
« Reply #18 on: March 18, 2014, 06:17:21 pm »

If I wanna use a switcher to put more than one mortal kombat pcb in this thing..
which one should I go with ?
Logged
STEVESPEEZE
Guest
« Reply #19 on: March 19, 2014, 11:41:09 pm »

Ok so now I got the rest of my caps for the audioboard... every single cap on the board plus the crystal are replaced with quality new caps.

I noticed the volume got louder after new caps.
Logged
Anunaki
Newbie
*
Offline Offline

Posts: 28



View Profile WWW
« Reply #20 on: March 20, 2014, 01:19:54 am »

Quote
If I wanna use a switcher to put more than one mortal kombat pcb in this thing..
which one should I go with ?

This guy has already done a multi MK machine:

http://www.habosarcade.com/MortalKombatMulti%20JammaCab.htm

Logged

check out my website: www.anucade.com
STEVESPEEZE
Guest
« Reply #21 on: March 20, 2014, 01:28:35 am »

Quote
If I wanna use a switcher to put more than one mortal kombat pcb in this thing..
which one should I go with ?

This guy has already done a multi MK machine:

http://www.habosarcade.com/MortalKombatMulti%20JammaCab.htm




Im only doing two mortal kombats in my machine. MK 1 and 2.
Reason being is I can buy a dedicated MK 3 and 4 off a buddy of mine cheap so im just gonna do that after so I have three machines.
plus nobody helped me build this machine Smiley
Logged
Anunaki
Newbie
*
Offline Offline

Posts: 28



View Profile WWW
« Reply #22 on: March 20, 2014, 02:48:35 am »

OK, keep in mind that the kick harnesses aren't the same between MK1 en MK2

You could get a regular Jamma switcher, but you also need to wire both kickharnesses
Logged

check out my website: www.anucade.com
STEVESPEEZE
Guest
« Reply #23 on: March 20, 2014, 04:38:08 pm »

I already know I wired the cab the other day.
Logged
STEVESPEEZE
Guest
« Reply #24 on: March 20, 2014, 04:44:35 pm »

"You filthy little Hoe" 
I took the monitor out today.. while its out I gotta remove the old blitz pcb holder, fix the nicks and sand the cab.
then I gotta clean this filthy bastard and re cap it.

I already have a cap kit... and I went to cables and connectors to buy anything that's not in the kit that I can change.
Every cap gets changed .. not just whats in the kit.
Also on a side note I got my buddy making the new control panel as we read this so when I go to put
all the new artwork on the machine looks brand new.
Logged
STEVESPEEZE
Guest
« Reply #25 on: March 22, 2014, 03:05:10 pm »

"TEST YOUR MIGHT!"

While im waiting for tattoos to heal, I decide to recap the monitor.
a lot of caps .. 
http://youtu.be/J4wlSOzT844
Logged
STEVESPEEZE
Guest
« Reply #26 on: March 22, 2014, 05:40:51 pm »

I hate this hacked ass monitor chassis so much I just bought a rebuilt one.
Logged
STEVESPEEZE
Guest
« Reply #27 on: March 24, 2014, 04:09:36 pm »

Ok well since im waiting for a new monitor chassis and my friend is cutting me a nice exact replacement for my CP .
This is a complete restore.. It may not be an Atari machine from 5000 years ago but its an arcade machine none the less.

After about 3 coffee's I got my ass in gear and went for a total stripping to one side of the cab.

http://youtu.be/ysPB5Pc44wY

then I wanted to get rid of every rough edge on the cab... I block sanded the entire side and edges and used body filler
to get rid of any nics or dings.

http://youtu.be/Kp0Mu8MVNMI

Words of wisdom.  Use a mask when sanding bondo.. I caught cancer from doing autobody for 16 years 90% of the time I used a mask and you are still at risk.
That shit goes in your lungs and does not desolve. I figured id mention that as ive not seen it mentioned in any cab restore bondo job (even the dude in TNT vids)

http://youtu.be/SKTLG8Kc6lo

Its flat.. and the edges are straight. Ill do the other side in a few days but you got the idea. 
If I was to be painting the sides and adding partial art (mortal kombat covers entire side with art) I would have used pro fill.
Profill is a very light , thin bondo.. its expensive I might add.  but it would have made the side completely smooth.


Logged
STEVESPEEZE
Guest
« Reply #28 on: March 25, 2014, 12:09:18 pm »


While im waiting on parts.. peep this.
http://youtu.be/PWGUAxX79Jw
Logged
STEVESPEEZE
Guest
« Reply #29 on: March 26, 2014, 02:08:47 pm »

Welp...
The control panel is finished.

http://youtu.be/Vwm6lhyhVv4

Logged
Pages: 1 [2] 3
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Install Simple Machines Forum Valid XHTML 1.0! Valid CSS!