Hey everyone ;-)

Looking to resurrect my WWF Superstars PCB can anyone help me with a manual or Schematics for the PCB.   Thanks a lot ;-) Any help would be awesome

thnx
Dwight

Sounds good ;-) the monitor is not great but you do have a point the replacement one could be faulty too. 

I'll check the +5 voltage at the game PCB and reseat the connectors, I just erasered the edge connector I didn't even try to coin up the machine, with the new monitor ;-)   I did notice the sound jumper was set in the off position so it could be playing blind.

I saw your tube rejuvenator video, that's the newest tube rejuvenator I think I have ever seen.....I have both the BK-466 and the BK-467 super old school rejuvenators ;-)  , but at least one of the sets came with the C-23 connector ;-)

next weekend I'll give the Commando board another try ;-)

Thanks
Dwight

Hey,

Well I did take the Shin-lee EM-201 monitor out of the mix and the Commando game started without blowing a fuse.  Something funky must be with that monitor ;-( Swapped out the monitor with another Wells Gardiner I had lying around, only image i can see is a grey screen with some crackle from the speaker.   I hope this board isn't a dead board.

Should I pop off the roms and eraser the edge connector,  I'm soooo hoping this is just like an old Atari or Nintendo Cartridge you guy's remember sometimes they would just get really dirty ;-) I'm not seeing any burn marks anywhere or bad solder points on the board.   Doesn't look like this PCB has been worked on.

I'm going to check the voltage on the PCB Once I built a Jamma to Capcom harness and use my testing rig. 

ty
Dwight

Hi,

Hoping I can get some help with my new Commando Arcade, it keeps blowing the 3A slow blow fuse beside the power supply.   Not sure how to check the wired ISO transformer.  Looks like nothing is actually powering up, the only action I have is when I flip the switch and the Fuse blows everytime ;-)  Hoping that the PCB isn't dead.

It's a Sin Lee 19" EM-201 looks like it's a good shape no burn in at all ;-) should I swap the switching power supply or could it be the ISO....the harness is a hack job from the Konaimi to Classic Capcom.   It was a Roc n' Rope cabinet that was converted to Commado ;-)

Any help would be great thanks a lot

ty
Dwight

Hey,

I'm Dwight I found your Youtube channel really helpful awesome videos!!
really learning a lot from ur vids man ;-) keep up the good
work ;-)