I would check your to see if your wires to the monitor were on the right way. Then maybe your voltages to the monitor or recheck your caps see if there are all going the right way and check to see if your not bridging any thing you soldered just look over everything.

Hi congrats on your picking up a dk. The joystick if you go to mikesarcade.com he sells the parts to rebuild the dk joysticks and replacement joysticks also sells the high score save kits with the d2k on them. I would recap the monitor or get the cap kit off Ian and do it when you feel like it . I think you can also rebuild the power supply I think there's some caps in that to I haven't done anything to my power supply it has not given me any problems yet but congrats again man post some pics some time.

Hi yea it should be the same I know mikes arcade has some nice Dk control panels

Hi I congrats on picking up a dk3 I have been using my shop vac with the brush attachment and gettin all the junk out of mine. I also picked up a mini brush kit for my shop vac to get in the hard to reach places works out pretty good. Then after that I wipe it down with some simple green and a rag.

No I looked on there also thank you though

Hi I am having problems with my Frogger I looked up other threads on here I have checked my voltages , changed the volume pot I keep having the same humming coming out of the speaker. I am having trouble finding info on my pcb also the number is 834-0084 on the main board the video is 834-0074 I have a Frogger manual but that pcb is not listed in my books it skips my number and goes to 834-0085 . the heat black sink that's by the edge connector gets really hot to the touch I didn't know if this was normal I didn't know if this helped but the numbers on my stickers were p/n:700-0069-00 please help me out thank you

Hi I am having problems with my Frogger I looked up other threads on here I have checked my voltages , changed the volume pot I keep having the same humming coming out of the speaker. I am having trouble finding info on my pcb also the number is 834-0084 on the main board the video is 834-0074 I have a Frogger manual but that pcb is not listed in my books it skips my number and goes to 834-0085 . the heat black sink that's by the edge connector gets really hot to the touch I didn't know if this was normal I didn't know if this helped but the numbers on my stickers were p/n:700-0069-00 please help me out thank you.

Hi everyone so just did recently picked up a Frogger with a 44 pin . I have two boards for it one works 100% and one the sound is goofy on it. I just did cap kit on the monitor and I lost the sound on the board when I turned on the cabinet after I did the cap kit . I put the board in with the goofy sound in and now it works 100% and the sound so great I checked the other board put it back in again and is has no sound what happened to it where should I start looking please let me know thank you .

Then why did I have such a problem with your junky sideart when I did the same procedure with Phoenix arcades. His went right on no problem and stuck to my cabinet with out the spray adhesive like You had suggested with yours cause yours would not stick and looked like shit afterwords and had to start all over again. I don't care what your reviews say I won't ever buy from you again or sideart off eBay and I am hoping it saves  someone ease from doing the same mistake I have and have to redo the all hard work and money they put into their arcades spend the little extra money and buy sideart from a well known trusted person like Phoenix arcade and read about the person or Business on the  forms so call me a jurk I don't really care mike

Hi I just picked up a dk3 pcb off klov it turns on you can play it but it's missing some sounds like the coin up sound,the music when the bugs are flying around and donkey kong sounds please let me know where I should start looking and thank you for reading

I will do that thank you

I did the g07deluxe kit off bob Roberts if that helps anything

Hi I just did a recap on a go7 with a new fly back and new Horizontal Width Coil and reflowed the header pins it seams to take for ever for it to warm up. I also have to go behind the cabinet every time I turn it on and ether adjust the fly back for brightness or the focus or both after it warmed up would it be the new fly back going bad already please let me know it is also on a ms pac thank you again

Hi everyone I am on a hunt for a working dk3 pcb. I have a vector switcher coming and so far I have a original cabinet with dk,d2k and dk Jr. I just would like to have the third game in there also so. thank you for taking the time to read my post..

I have all my money back from this nightmare and took all day and restriped the cabinet again and  I placed a order with Phoenix arcades. My order should be in Tuesday I have pictures of the crapy art work before I took it off but I do not know how to post pictures on here. Phoenix has been very helpful to me  answering all my questions. I will never buy art work with out  checking out them on kolv or on here to see if they have bad reviews. Also the guy was mad I  warned  People about his crappy work on kolv and here but I don't care I don't want people to make the same  mistake  I did outing good money in redoing these arcades and getting junky side art.