|
Title: Galaxian K4500 Post by: Groove on March 11, 2016, 09:45:48 pm Hey all! I picked up a Galaxian cabinet less than a week ago. When I first got it, it was playing blind. Yesterday I tinkered with it, and got a green line down the center. It turns out the service switch was causing the issue. Last night, after more tinkering, I got blue and green working. This morning I noticed that some blue was leaking from the anode cup. I discharged the monitor, removed the cup, and cleaned everything. Reassembled and now I have red! I have been unable to get the convergence right. The monitor is very dim and, the left side of the image is pushed to the right about 2 inches. I ordered a cap kit since this machine is 35 years old. I plan to reflow the solder. Since I'll have the boards pulled out, may as well recap. Anything else I should look for, or just do the caps and see what happens?
(http://i.imgur.com/X25vV89.jpg?1) (http://i.imgur.com/uiiE8V5.jpg?1) (http://i.imgur.com/tRov3OC.jpg?1) (http://i.imgur.com/1dZ2pWx.jpg?1) (http://i.imgur.com/7jW9nWc.jpg?1) |