|
Title: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 06, 2013, 08:51:21 pm okay ive been working on this arcade for a few months now i pretty mutch finished it just need to get a picture from it and do some certain stuff (see checklist below)
It was originally a Jungle King cabinet CHECKLIST: COMPLETE-hook up the monitor,speaker,power,controls to the jamma harness UNCOMPLETE-getting a picture from the game UNCOMPLETE-Rotating the screen (its in a horizonal position when i have a verticle game) UNCOMPLETE- hook up the coin mech Heres some photos: https://docs.google.com/file/d/0B4cp0x0JBSiMU1NRZ1dwTTZUVjQ/edit?usp=drive_web Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 06, 2013, 10:31:21 pm okay ive been working on this arcade for a few months now i pretty mutch finished it just need to get a picture from it and do some certain stuff (see checklist below) It was originally a Jungle King cabinet CHECKLIST: COMPLETE-hook up the monitor,speaker,power,controls to the jamma harness UNCOMPLETE-getting a picture from the game UNCOMPLETE-Rotating the screen (its in a horizonal position when i have a verticle game) UNCOMPLETE- hook up the coin mech Heres some photos: https://docs.google.com/file/d/0B4cp0x0JBSiMU1NRZ1dwTTZUVjQ/edit?usp=drive_web Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 08, 2013, 01:34:48 am Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 08, 2013, 02:45:41 pm Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 09, 2013, 07:03:09 pm Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. ok its not playing blind i havent heard anything from it and im pretty sure its not power becuase i tested the voltage from the power supply from youre "how to fix a dead arcade -trouble shooting a craigslist purchase" video i think it might have to do with the settings on the back of the monitor or the dip switches on the PCB Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 10, 2013, 11:05:58 am Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. ok its not playing blind i havent heard anything from it and im pretty sure its not power becuase i tested the voltage from the power supply from youre "how to fix a dead arcade -trouble shooting a craigslist purchase" video i think it might have to do with the settings on the back of the monitor or the dip switches on the PCB Do you have the PCB plugged into a JAMMA harness?? Look at this: http://www.jammaboards.com/arcade_manuals/60-in-1_iCade_Classic_Arcade_Manual_Online.pdf Check out the dipswitch settings. If you are using a JAMMA harness and not the VGA you need dipswitch two to be "OFF". Also, make sure dipswitch four is "OFF" as that's the test mode. Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 10, 2013, 07:40:11 pm Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? Quote well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. Quote ok its not playing blind i havent heard anything from it and im pretty sure its not power becuase i tested the voltage from the power supply from youre "how to fix a dead arcade -trouble shooting a craigslist purchase" video i think it might have to do with the settings on the back of the monitor or the dip switches on the PCB Quote Do you have the PCB plugged into a JAMMA harness?? Look at this: http://www.jammaboards.com/arcade_manuals/60-in-1_iCade_Classic_Arcade_Manual_Online.pdf Check out the dipswitch settings. If you are using a JAMMA harness and not the VGA you need dipswitch two to be "OFF". Also, make sure dipswitch four is "OFF" as that's the test mode. ok i looked and it turns out 2 of the dip switches were in the wrong place but nothing improved also i saw that the little push button thing on the door is broken like the wires fell off and the spring is messed up. also if i were just to switch it to a vga computer monitor would it still work to have the jamma harness connected and get stuff like the controls and speakers from it? Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 10, 2013, 08:24:36 pm Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? Quote well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. Quote ok its not playing blind i havent heard anything from it and im pretty sure its not power becuase i tested the voltage from the power supply from youre "how to fix a dead arcade -trouble shooting a craigslist purchase" video i think it might have to do with the settings on the back of the monitor or the dip switches on the PCB Quote Do you have the PCB plugged into a JAMMA harness?? Look at this: http://www.jammaboards.com/arcade_manuals/60-in-1_iCade_Classic_Arcade_Manual_Online.pdf Check out the dipswitch settings. If you are using a JAMMA harness and not the VGA you need dipswitch two to be "OFF". Also, make sure dipswitch four is "OFF" as that's the test mode. ok i looked and it turns out 2 of the dip switches were in the wrong place but nothing improved also i saw that the little push button thing on the door is broken like the wires fell off and the spring is messed up. also if i were just to switch it to a vga computer monitor would it still work to have the jamma harness connected and get stuff like the controls and speakers from it? One last thing, it takes about one minute for that board to boot. Are you waiting? Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 11, 2013, 07:22:53 pm Quote Do you know if the monitor is working? Do you know if the PCB is working? Does the game play blind? Quote well by is the monitor working do you mean does it show anything at all on the screen? according to the pictures i took it has some static, and i know the pcb works i just bought it brand new a few weeks ago and i have no clue what "blind" is I'm trying to isolate the issue to a PCB or to a monitor issue. The game plays blind if you can start a game and HEAR it but not see it. If that's the case then it's a monitor issue. If the monitor is messed up but the game will not start and there is no sign of the PCB running then it's a PCB/power issue. Quote ok its not playing blind i havent heard anything from it and im pretty sure its not power becuase i tested the voltage from the power supply from youre "how to fix a dead arcade -trouble shooting a craigslist purchase" video i think it might have to do with the settings on the back of the monitor or the dip switches on the PCB Quote Do you have the PCB plugged into a JAMMA harness?? Look at this: http://www.jammaboards.com/arcade_manuals/60-in-1_iCade_Classic_Arcade_Manual_Online.pdf Check out the dipswitch settings. If you are using a JAMMA harness and not the VGA you need dipswitch two to be "OFF". Also, make sure dipswitch four is "OFF" as that's the test mode. ok i looked and it turns out 2 of the dip switches were in the wrong place but nothing improved also i saw that the little push button thing on the door is broken like the wires fell off and the spring is messed up. also if i were just to switch it to a vga computer monitor would it still work to have the jamma harness connected and get stuff like the controls and speakers from it? One last thing, it takes about one minute for that board to boot. Are you waiting? Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 11, 2013, 08:53:52 pm The interlock could prevent the power from getting to the board. I forget, does the board have an LED on it?
Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 11, 2013, 09:43:16 pm I dont think so
Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 11, 2013, 09:59:13 pm I dont think so Did you check the voltages at the board? Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 12, 2013, 10:18:22 pm uhhhh i dont think so what do you mean ? plus as i said its Brand new
Title: Re: Need Help with my 60 in 1 custom arcade Post by: Mr_Rampage on December 12, 2013, 10:21:31 pm uhhhh i dont think so what do you mean ? plus as i said its Brand new I think he means where the interlock connect to the board to make sure its getting enough current. I'm not sure tho Title: Re: Need Help with my 60 in 1 custom arcade Post by: John's Arcade on December 13, 2013, 10:10:21 am uhhhh i dont think so what do you mean ? plus as i said its Brand new The board needs voltage to work. Are you sure it is getting voltage?? Are you sure it's booting? Title: Re: Need Help with my 60 in 1 custom arcade Post by: Gamerfreak on December 13, 2013, 07:01:54 pm uhhh im not sure i havent tested for that how do i?
Title: Re: Need Help with my 60 in 1 custom arcade Post by: arcadefan1985 on February 05, 2014, 08:35:49 pm The 60-1 pcb has a green led that flashes when operating and a red when a faulty.
Title: Re: Need Help with my 60 in 1 custom arcade Post by: STEVESPEEZE on February 11, 2014, 08:48:22 am The interlock could prevent the power from getting to the board. I forget, does the board have an LED on it? Yes it has two.. one blinks orange until the board fully boots |