|
Title: New scratch build project - Jaleco Low Pro Post by: leejsmith on April 20, 2019, 09:28:15 am (https://i.imgur.com/hJZOJwU.jpg)
Playlist of quick update vids https://www.youtube.com/watch?v=y6DVTHbyT2k&list=PLm24lW1EHXRBxwuPd08S4FU7-KebpMXcF Now I have to repair the screen and make a harness. This cab has a pull out draw for game boards so easy access from the front. Title: Re: New scratch build project - Jaleco Low Pro Post by: John's Arcade on May 02, 2019, 01:55:54 pm That's a neat project! Looks good.
Title: Re: New scratch build project - Jaleco Low Pro Post by: leejsmith on May 02, 2019, 03:51:10 pm That's a neat project! Looks good. The screen is kicking my ass, Had HV, but no picture, replaced a few parts including the LOPT and now I have ticking, Yes it's a Hantarex lol. Title: Re: New scratch build project - Jaleco Low Pro Post by: leejsmith on May 19, 2019, 02:57:42 am I have the screen back from repair and it's working and although still needs some adjustment it looks ok. This was a £10 dead ebay 26" Polo screen and £15 untested MTC-9110 chassis.
https://youtu.be/pBitfSMjh70 (https://i.imgur.com/eU9GFUyb.jpg) Title: Re: New scratch build project - Jaleco Low Pro Post by: leejsmith on June 26, 2019, 06:23:00 pm I installed a PI2JAMMA board with a pi3 into my cab. It's running PinHP and this is specifically setup for the board and set to run 15Khz CRT and Jamma joysticks with no messing about at all. I had spent time looking at the GERT VGA adaptors with retropi , but was lost trying to find what mode to run the CRT at and then I saw you had to add configs per game, but this does not need anything like that and you can tweak it all from inside mame.
https://www.youtube.com/watch?v=cDiYm0tcjt4 Title: Re: New scratch build project - Jaleco Low Pro Post by: Namco51 on September 16, 2019, 11:54:52 am Damn, that's a nice project. I'll have to watch the whole series.
|