John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Arcade and Pinball Discussions => General Arcade and Video Game Discussions => Topic started by: NoQuarter on November 26, 2018, 09:14:37 pm



Title: Monitor Dilemma
Post by: NoQuarter on November 26, 2018, 09:14:37 pm
Hey guys wondering if I could get your help/opinion

I bought a Dynamo HS5 without doing my due diligence, and now facing this issue.

(https://i.imgur.com/vtdqOIV.jpg) (https://i.imgur.com/ukfYV1R.jpg) (https://i.imgur.com/a3SZCw6.jpg) (https://i.imgur.com/7w4xeaM.jpg) (https://i.imgur.com/BMMW6PO.jpg)

My OCD is itching, let me hear your thoughts, can I use a wooden bracket around the monitor as a spacer? i do have some room in the front behind the glass, or would you leave it?



Title: Re: Monitor Dilemma
Post by: allansim on November 28, 2018, 07:30:42 am
Can you do what they did with some cabarets and cut a hole in the rear door for the neckboard to stick out and then cover that with a with a plastic shield?



Title: Re: Monitor Dilemma
Post by: darkcat1 on November 30, 2018, 04:08:24 pm
you could also try moving the monitor bracket up a bit? ot cutting one out of a slightly thicker piece of wood?


Title: Re: Monitor Dilemma
Post by: NoQuarter on December 02, 2018, 05:01:05 pm
thanks guys, i will probably go down the thicker monitor bracket route! wish me luck