New scratch build project - Jaleco Low Pro

[leejsmith]

Playlist of quick update vids

https://www.youtube.com/watch?v=y6DVTHbyT2k&list=PLm24lW1EHXRBxwuPd08S4FU7-KebpMXcF

Now I have to repair the screen and make a harness. This cab has a pull out draw for game boards so easy access from the front.

[John's Arcade]

That's a neat project! Looks good.

[leejsmith]

That's a neat project! Looks good.

The screen is kicking my ass, Had HV, but no picture, replaced a few parts including the LOPT and now I have ticking, Yes it's a Hantarex .

[leejsmith]

I have the screen back from repair and it's working and although still needs some adjustment it looks ok. This was a £10 dead ebay 26" Polo screen and £15 untested MTC-9110 chassis.

https://youtu.be/pBitfSMjh70

[leejsmith]

I installed a PI2JAMMA board with a pi3 into my cab. It's running PinHP and this is specifically setup for the board and set to run 15Khz CRT and Jamma joysticks with no messing about at all. I had spent time looking at the GERT VGA adaptors with retropi , but was lost trying to find what mode to run the CRT at and then I saw you had to add configs per game, but this does not need anything like that and you can tweak it all from inside mame.

https://www.youtube.com/watch?v=cDiYm0tcjt4

[Namco51]

Damn, that's a nice project. I'll have to watch the whole series.