John's Arcade Forum - Classic Arcade and Pinball Collecting and Restoring Discussion Forum - RETRO MAME - Nintendo Vs Forum

Arcade and Pinball Discussions => Beginner's Help Corner => Topic started by: adamtoth on October 26, 2016, 11:37:36 am



Title: DK Cabinet Restore
Post by: adamtoth on October 26, 2016, 11:37:36 am
I just got an empty blue Japanese DK cabinet (plywood), and was contemplating what to do with it. I am leaning towards a full DK restore. The cabinet is in great shape, a few scuffs here and there, no artwork at all. The model number on the tag is PCKG1-UP-US, and a ~3000 serial number. I'm assuming this was a PlayChoice conversion at some point? There is no original DK tag on it (missing the back door as well).

It is completely stripped, so I'll need wiring, monitor, coin door, CP, artwork, controls, power supply, the whole entire works. It has a mount for the 4 board DK set, which is what was original to the Japanese cabs if I understand correctly.

Has anyone done this kind of full restore before? Is there any kind of full list of parts that I'd need? Any rough estimates on cost for full restoration? I'm mentally totaling things up and come to around $800 or so when all said and done. Does that sound right?

If you had a blank slate DK blue cab, what would you do with it?

Thanks!

-Adam


Title: Re: DK Cabinet Restore
Post by: John's Arcade on October 26, 2016, 12:24:03 pm
If I had an empty DK cabinet I'd make it a DK again.

Shouldn't be too hard.

All plywood DKs are Japanese. It probably had a 2 board stack in it.

I'd look on ebay for an original CP, Marquee, and bezel. Same with PCB and harness.


Title: Re: DK Cabinet Restore
Post by: John's Arcade on October 27, 2016, 08:31:19 am
http://www.ebay.com/itm/Vintage-Working-Nintendo-Arcade-Power-Supply-Wiring-Harness-Power-Cord-etc-/162255287242?hash=item25c72b33ca:g:DZUAAOSwUEVYERy2


Title: Re: DK Cabinet Restore
Post by: adamtoth on October 27, 2016, 11:43:05 pm
Thanks John! I bought this. And so it begins. Someone locally has a 20ez monitor and an original bezel.

I think I am going to use a repro control panel and overlay, rather than try to wait for an original one to come up (I need new repro side art anyway). Any thoughts on the best place to get a DK CPO?


Title: Re: DK Cabinet Restore
Post by: P-feif on October 30, 2016, 06:57:49 pm
Looks like you already found a monitor. I'll post this anyhow...  I found this on Craigslist.

http://toledo.craigslist.org/ele/5836989591.html