|
Title: Centuri coon door Post by: Low_crawl on September 19, 2016, 09:14:54 am Can anyone give some details on how to do the raised "Centuri" logo? John did one on his Gyruss and it really pops, but he skipped that part in the video. Is it bare metal or painted? How is it done?
Sent from my SAMSUNG-SM-G900A using Tapatalk Title: Re: Centuri coon door Post by: John's Arcade on September 21, 2016, 03:38:02 pm Can anyone give some details on how to do the raised "Centuri" logo? John did one on his Gyruss and it really pops, but he skipped that part in the video. Is it bare metal or painted? How is it done? Sent from my SAMSUNG-SM-G900A using Tapatalk Paint the logo black, then sand the high spots down to metal after it dries. You'll have a nice silver logo when you're done. Title: Re: Centuri coon door Post by: Servo on September 21, 2016, 03:57:18 pm Low_crawl
This is my coin door https://www.flickr.com/photos/arcadeoutsiders/28455384693 and i did it the was john described, except i used single edged razor blade to remove most of the paint on the letters. but this has come to my attention recently http://guscade.blogspot.com/2012/10/gottliebs-qbert-1982.html http://guscade.blogspot.com/2012/10/gottliebs-qbert-1982.html this appears to be the way that the doors shipped from the factory, because that guys qbert looks 100% untouched and in great shape. i may be rethinking my finish Servo Title: Re: Centuri coon door Post by: Servo on September 21, 2016, 03:59:12 pm low_crawl, sorry i just noticed that you asking about a centuri door, im not sure about the finish on those, i think it was just polished metal so go with the way John described
Servo Title: Re: Post by: Low_crawl on October 02, 2016, 11:13:15 am Thanks guys! Adding this to my project list. It looks soooo good that way!
Sent from my SAMSUNG-SM-G900A using Tapatalk |