|
Title: namco ms pac-man galaga Post by: mnegr454 on January 23, 2016, 07:14:56 pm I just got a new game namco ms pac-man galaga. I'm getting no glow from the back of the monitor and its black in the front , also a hissing noise from there. Does the board look compleate.
(http://i.imgur.com/J2iJultb.jpg)(http://i.imgur.com/RHMZg0hb.jpg) Title: Re: namco ms pac-man galaga Post by: John's Arcade on January 23, 2016, 08:23:49 pm Monitor is making a hissing noise? Bad flyback? Is the game playing blind?
Title: Re: namco ms pac-man galaga Post by: mnegr454 on January 23, 2016, 08:35:05 pm Is the game playing blind? I think so because when I turned it on I hear the music of the start up. Yes, it's making a hissing noise, I think its the monitor or in that area. Are these the symtoms of a bad flyback? There is nothing on screen. Will do some research on flybacks.
Title: Re: namco ms pac-man galaga Post by: mnegr454 on January 30, 2016, 08:36:12 pm Hey, got the game working but the picture is upside down. I think some wires are not in the right place. One set of wires near the fly back are red and blue. Then there is a set that are green and yellow on the other side. Any ideas which could be wrong? Also the fire button wont work. Replaced the flyback and two caps.
Title: Re: namco ms pac-man galaga Post by: lordkahless214 on February 01, 2016, 01:16:56 am You need to flip the yoke wires to correct the image, this video by Buffett explains how https://www.youtube.com/watch?v=WP3ll7nlEEE (https://www.youtube.com/watch?v=WP3ll7nlEEE)
as for the button not working, check the wires under the control panel, make sure they are both connected, if they are try swapping it with one of the player 2 start buttons and see if that works, if it does you may only need a new button, the fire button going bad seems common on the reunion cabinets |