This is my typical line up. I really only change the last 2 games, and thats when I'm testing chips and carts for customers. Super mario bros is my favorite. Might sound cliche, but it still is.

For ease of use and availability, I have decided to combine all my products and services, including future projects into one thread in this section.

Everything can be found on http://www.PC-10.com

NES Game Link:
This is the ALL BIOS (usable in every Playchoice cabinet), NES cartridge adapter.

Two available options:
Standard Title - $110 plus shipping
Custom Title - $118 plus shipping
Custom Title can be a maximum of 19 characters including spaces and will be shown in all capital letters.



NES Playchoice Conversion Chipsets:

$26 per complete conversion chipset.

These chipsets will work on both factory BIOS and the modified 1.1 BIOS. These will title correctly on the title screen.  However, if you run the original factory BIOS, the custom instruction pages will be accessible.

Over 75 NES conversions chipsets are now viewable and available on the website.

New games, based on requests, will continue to be added as made available.  If you don’t see something you’re looking for, ask I’ll let you know availability.

Some games require modifications to work properly.  I can perform these modifications if you mail in your cart in advance or if you are not comfortable replacing eproms, I can perform that service if you send me your cartridge.
 
I also have a supply of some cartridges that could be used as ready-to-go conversions, for those that prefer the complete solution.


Original Factory Playchoice Chipsets:

Brand new section that has been recently added by popular request. 

$26 per complete factory playchoice chipset.

These chipsets come complete with the necessary EPROMs and security chip for each game.
Most titles are available for purchase. Ones that are not available can be found on the Custom Games section of the website.

These chipsets are exact replacements for the originals, so they will display correct Titles and Instruction screens, exactly as an original cartridge will.

Multiple options available, including complete chipset, single replacement security chip or even individual programmed EPROMs.
 


Nintendo Vs. Chipsets:

$20 plus shipping for daughtercard  EPROMs
$26 plus shipping for 6 EPROM sets
$39 plus shipping for 12 EPROM dual game sets

I can supply complete lineup of known Vs. game chipsets.

Identical copies of original ROMs, all tested on original hardware before shipping.
 
 

Reproduction / New Playchoice carts:

Complete lineup of brand new cartridges will be available soon!  These will be available for both original factory games and the custom conversion games.  I will be starting with small runs in the next 3-4 weeks, and then move into larger runs if the market demands it.
 
Please join the mailing list to keep up to date on this exciting new adventure and all the additional offerings at PC-10.com.

You can Order them directly from my website at: http://pc-10.com/nesgamelink

As an added bonus for just a few dollars more you can have your own custom title on the cart instead of the NES GAME LINK title. If you need a new bios chip I can supply that as well, so you can go back to factory bios from the modded freeplay bios.


These have been tested and working with over 100 carts, including the POWERPAK, and other bootleg type multicarts.
You can get the POWERPAK HERE: http://www.retrousb.com/product_info.php?cPath=24&products_id=34
I have personally tested this multicart as well: http://www.aliexpress.com/item/New-Arrival-150-In-1-Rockman-1-2-3-4-5-6-Game-Card-For-72/32403800897.html
Games seem to work well, a few the sounds are off, but for the price you can't beat it. the only downside to the cart is you have to fully power off your machine to change to the next game in the list, unlike the POWERPAK where you can simply return to the main title screen.

**** will work with all bios models. factory single monitor, factory dual monitor, and the 1.1 modded bios as well****

It's extremely easy to install a gun in a vs cabinet, the hard and expensive part is finding a gun/holster/ and gun wiring..... Be ready to pay atleast $250 for that stuff in working condition

Ill guess a dedicated vs gun cabinet, with a vectorlabs switcher, and all 4 gun games installed.....

This is cross posted on klov as well:

I'll probably regret it later,
My working complete tennis pcb

$250 plus fees plus shipping

I wont bump the thread, its a one time . Pm me if interested.

Same name here and on klov.

looking to sell off some stuff:
mostly nintendo vs stuff but someother odds and ends at the end, i am going to be kind of descriptive and give some options, I would really like to get this stuff shipped out.

1. **SOLD***empty vs pcb. tested working on both sides $50 shipped

2.**SOLD*** Vs pinball pcb. both sides of the board work. pinball comes on one side. other side is empty.
$90 shipped ( if pinball does not suit your needs i could turn it into hogan's alley, mach rider japan, , battle city, or mighty bomb jack instead)

3. Vs raid on bungeling bay pcb. both sides work, but raid has to be installed by itself.
$90 shipped. ( if raid does not suit your needs i could turn it into ladies golf, golf, mach rider, or slalom)

4. Vs Duck Hunt pcb. both sides work. duck hunt comes on one side. other side empty
$140 shipped. ( if duck hunt does not suit your needs i could turn it into star luster, or for an extra $10, i could burn all 12 tennis chips, then you would just need 1 ppu and 1 cpu to get it going. those are currently forsale by some other members.)

5. vs dual system empty control panels. not in bad shape, would need new cpos to be perfect. $20+ actual shipping charges on the pair

6. Vs unisystem control panel wire harness. both left and right side. $15 shipped

7. ****sold****2 odd looking used joysticks. one is real loose, one is tighter. untested no clue on them.
( see pictures) $15 shipped for the pair

8.**SOLD*** LED buttons. no microswitches. appear to be new, never used, but where stored in a box together. 9 white buttons. 13 yellow buttons. 20 extra spacers. 3 extra nuts. 40 extra led holders. $25 shipped on the lot.

9. capcom bowling jamma pcb. tested and working. would need new battery to keep saved settings. $30 shipped

10. **SOLD***vs super mario bros original chipset. just the 6 roms. NO PPU or CPU. $25 shipped

11. Vs skykid burnt chipset. Just the roms. $10 shipped

link to pictures here:
http://s1380.photobucket.com/user/jo...orsale%20stuff

all prices are shipped in the US, ill ship just about anywhere else but add shipping charges to the total. feel free to make me an offer as well.

Check your ground connection at the edge connector. I had a broken ground wire there, and the heat shrink was still holding it in place. Or you can borrow a ground from the player 2 side and see if that makes it work.

Did these adapters ever get produced?

When they put a gun game in, they where not thinking about the next game to be installed. On the gun games remember you start the game by firing the gun at the screen. Not by hitting player 1 or 2 button. Had they wired it to the left connector, the gun would not start the game.
I made a quick connect for my gun, so i can switch back and forth.

I am curious, is this a pacman cabinet to jamma board adapter, or pacman board to jamma cabinet?
Since they are made both ways i am just trying to make sure everyone know which it is.

Freedom force used the same daughter card as sky kid. Freedom force only seems to work on that board and only on the 6/7 side of board not 1/2 side. Sky kid works on all the boards. Rbi works on all the boards as well, but it needs a special security chip to function, and also only works on the 6/7 side of the freedomforce/sky kid board. I have not tried the boxing, but would think its the same as rbi since it has a security chip also.

As for non daughtercard games, as long as you have the right ppu, you can play the games that match it.

You should take it apart and clean it, but have you simply tried to lubricate it? A few drops of a product like 3in1 oil may solve your problem.

http://www.vector-labs.com/index_vs41.html