This should be your next soldering iron John  

Ben's Wearable Solder Gauntlet Part 1

Ben's Wearable Solder Gauntlet Part 2

That big kong is crazy, and interesting in the same time

but as a zaccaria fanboy, i need to say i like the zacc version of crazy kong the most.

Hi there, love your voicemails on the Arcade Outsiders 

Hi Bela, nice to see you also on this side 

I am mostly a windows guy, but i have a raspberry wich runs a distro based on debian afaik, i use it as my tiny webserver and its fun to mess around with.
My linux knowledge is limited though.

Big thumbs up to you!

The 20EZ is not the most simple monitor to cap so taking that as a first deserves a big thumbs up !
I can understand marathoning the johnd videos i am addicted too

Verstuurd vanaf mijn GT-I8260 met Tapatalk

Don't forget his awesome new tweezers   ;)



http://nl.aliexpress.com/item/Wholesale-Retail-Make-Up-Led-Light-Eyelash-Eyebrow-Hair-Removal-Tweezer-Free-Shipping-7-orders/1399735933.html

I really have no problem with the Soldapullt. Why you guys need that fancy stuff for cap kits?!?

you know how different it was going from pliers to a real ratcheting crimper?  
Thats the difference when you go to the hakko 808 to desolder stuff.

I agree that the soldapullt works ok, but ever since i have my Pace desoldering station, my soldapullt is collecting dust  

This is a great thread don't know how I missed this. I will have to admit I have copied most of John's equipment just so I can look at his how to's and be able to know I have the right tools.

Make sure you got that hi tech flux apply tool that john uses

I think caps

Hey guys,

I did not find a dedicated artwork section on the forums, so i hope its ok to post it here.

I have posted this on DLF, so its a straight copy paste from there  ;)

I do need to add that i took the color from the scan as i dont have the Original source, so it could be that it needs to be colormatched.
anyway, here the post ;


I have had this long on the "todo list", and finally i started and finished it.

Cocktail Table Control Panels Vectorised for Reproduction By Etienne

there are two different metal control panels;



I made 2 layers, one with the ink, and the other containing the cut / mill lines.

as seen in the sample pics, there is a "028M" and a "028S" variant.

I started with the "028M"



After that i did the adjustments to that file to create "028S"



if you want them, here are the download links:

028M.pdf

028S.pdf

Swapping yoke wires is only nessesary when the picture is reversed, for example wen used with a mirror setup

catch the outrun, like said before, the Original outrun is the best version of outrun there is

Just added 4 to the feed  ;)

An arcade is a BUILDING that you walk into to play the arcade games that are inside.

Hey Dre, nice to see you here too 

they look M5 to me, but i could be wrong..

did you measure the diameter ?